How To Hang Bikes In Garage? There are a few different ways that you can hang your bike in the garage. One way is to use hooks that you can screw into the wall or ceiling. Another way is to use a pulley system, where you can raise and lower the bikes as needed. Whichever way you choose, make sure that the bikes are securely hung so that they don’t fall and get damaged.
Follow our post for more details.
What You Need
- Long screws
- Anchors for sheet rocks
- Two strong bike hooks per bike
- 2 pieces of leftover plywood per bike
- Screwdriver
- Drill
- Stud finder
- Measurement tape
How To Hang Bikes In The Garage From the Ceiling
Step 1: Look For Studs
Start looking for ceiling studs once you’ve gathered all of your tools and supplies. Ideally, you should hang the bike parallel to the direction of the studs. By doing this, you’ll be able to secure both bike hooks to a stud.
We had to hang bikes in both directions due to the configuration of our garage (parallel to the studs and perpendicular to the studs). The only bike that could have both hooks attached to a stud as a result was one.
The distance between the bike wheels and the spacing between the studs are different, so Andy had to fasten part of the bike hooks to the sheet rock without hitting a stud.
Step 2: Pre Dill Holes
Andy is afraid of hanging anything from sheetrock, so he screws enough anchors into the plywood to support hundreds of pounds!
In order to determine where to put the screws, Andy found the studs and drew some pencil marks. The distance between the tires was then measured. The secret is to measure from one tire’s point of contact with the ground to the other tire’s point of contact. You want to leave this much space between each of your hooks.
For the bike hook and the screws he would use to fasten the wood to the studs and ceiling, Andy predrilled holes in the plywood. To prevent splitting the wood, it is a good idea to pre-drill holes.
Step 3: Cut Scrap Wood Rectangles
In order to give the bike hook a bit more “flesh” to screw into, Andy wanted to put the plywood up there. If studs are available, you can omit the scraps of wood and simply screw the hook right into a stud.
Step 4: Attach Bike Hook To Pre-drilled Holes
Simply screw the bike hook into the already-drilled hole after attaching the plywood to the ceiling/stud a few times. And there you have it—instant garage space!
Top Best Bike Storage Ideas
Vertical Bike Storage on the Wall
The Most Bikes Can Be Stored While Using the Least Amount of Wall Space Since bikes are hung vertically (obviously! ), you’ll need enough floor-to-ceiling space to accommodate their length. However, you also need to provide enough area for the bikes to protrude into the room where you’re storing them from the wall.
This form of wall-mounted bike rack is not for you if you have a small 2-car garage and want to park both of your automobiles inside. Unless you don’t mind running into the bikes that are protruding out of the wall, it’s probably also not the greatest option for indoor bike storage.
Although children can seldom remove their own bikes from vertical bike racks, balancing bikes and any size pedal cycle for children are perfect for this type of storage.
PROS:
- Most bikes can be stored in the smallest amount of wall space, and there are a lot of possibilities.
- Generally accommodate all wheel sizes, even those of adult bikes and balance bikes.
CONS:
- Stick off the wall
- Kids find it challenging, if not impossible, to hang and unhang their bikes by themselves.
Wall Bike Rack (Vertical Bike Storage) Favorites
Steadyrack
Our preferred garage bike storage solution is Steadyrack. It’s distinctive vertical, pivoting design makes organizing your garage and getting to your bikes simple.
When storing many bikes, the pivot feature is even more useful than simply placing a single bike vertically against the wall. Closer bike storage is made possible by pivoting trays, which also make it simple to reach and transfer any bike you need. Additionally, depending on where the open space is in your garage, it enables you to load the bikes from a variety of angles.
We especially value the fact that youngsters with 24″ bikes can load and unload their bikes on their own, and that the Steadyrack doesn’t touch the bike’s rim.
PROS:
- Our 8-year-old can load his own bike; no lifting of bikes is necessary!
- pivots to place the bicycle flat against the wall.
- Away from the frame, rims, and spokes
- Four models cover the majority of bike types
- excellent results with 20″ and 24″ bikes
- Top-quality
- Installation is simple
CONS:
- Even with tire trays, it can be difficult to avoid generally scuffing walls.
Rubbermaid FastTrack Garage Organization System
Best Product to hanging bikes from ceiling in garage
More than simply bicycles in storage? Rubbermaid FastTrack can hang anything, including ladders, hoses, wires, shovels, and shelving. We hang bikes, scooters, and child bike seats on our FastTrack, but it can be configured to handle just about anything you can imagine.
The Rubbermaid system is available in two lengths: 48″ and 84″. You have access to a wide variety of bike hook designs that may be switched out as necessary once this wall-mounted bike rack has been set on the garage wall.
They quickly adapt to the configuration of your choice by simply snapping on and off and sliding across the rails. You just pay for the exact number of hooks you require because they are all ordered à la carte.
PROS:
- Extremely adaptable – can hang tools, hoses, and other sporting goods as well as store bikes vertically or horizontally.
- Simple to install
- excellent and robust
- Many bikes can be stored with little wall space
CONS:
- Kids find it challenging, if not impossible, to hang and unhang their bikes by themselves (as with all vertical storage)
- To fit three or more bikes, you need at least 48 inches of wall space.
- No tire trays, thus there will be tire prints.
Omni Bike Rack for Garage Wall
The Omni Bike Storage Rack’s simplicity is what sets it apart and makes it simple to install and operate. The Omni is similar to FastTrack, though not quite as adjustable, with hooks that may be moved to alter the distance between bikes and optional hanging attachments for tools, etc.
The more affordable Omni wall-mounted bike rack is a good option if you’ll only be hanging bikes. We advise the more easily adaptable Rubbermaid FastTrack option if you anticipate needing to store a range of garage finds.
PROS:
- Simple to install
- Excellent and robust
- The ideal hook form allows tires to easily slip on and off the rack while taking up little wall space to store several bikes.
CONS:
- Not child-friendly; all storage work must be done by adults
- puts attachments in place using hardware
Delta Cycle Leonardo Single Bike Hook
About as straightforward as it gets are bike storage hooks. We adore bike hooks because they let us hang bikes anywhere there is just the right amount of wall space in the garage. You only need the space to install one bike; there’s no need to locate space for wall rails to hold five or more bikes.
Although most bike storage hooks are somewhat identical, we like how the Delta hook has a red rubber cover to shield the spokes and wheel from harm. You can also buy these bike hooks with a rear-wheel tray to avoid unpleasant tire tracks on the garage wall.
Ceiling Bike Storage – Pulley Systems and Ceiling Tracks
You had better look up if your garage is small, has no walls, and has no floor space! Utilizing the annoying additional space over your head, ceiling bike storage racks store bikes up and out of the way. The Saris system can hold up to six bikes, unlike the majority of similar systems which are for single bikes.
PROS:
- Don’t occupy any floor or wall space.
- Simple to raise, lower, and access
- Some versions, like balance bikes and adult bikes, fit wheels of any size.
CONS:
- Invisible but not forgotten?
- Children cannot independently access bikes.
- Installing ceilings is more challenging.
- Bicycle hoists are only better for large children’s and adult bicycles.
Ceiling Bike Storage Favorites
Saris Cycle Glide Ceiling Bike Rack
The Saris Cycle Glide is the bike storage option that most impressed us out of all the ones we tried. It has earned a permanent spot on the ceiling of our garage because of how brilliantly it was created and how simple it is to use.
The Saris Cycle Glide easily fits any size bike thanks to sliding rails and sliding hooks. You can switch out the bikes you store at any moment by adjusting the hooks along the rails to match your bike’s wheelbase. In essence, this ceiling-mounted bike storage option is the most adaptable!
It is simple to access and remove a single bike by simply sliding the other bikes out of the way because the four bike rails can move horizontally across the base. While your car is parked beneath the rack, you can also remove or store bikes using the Saris Cycle Glide!
PROS:
- Perfectly holds every size bike, from balance bikes to adult cycles, making it great for the family.
- It Saves wall and floor space, and parking cars in the garage is simple!
- Accessing bikes individually is simple thanks to a clever sliding design.
- The sliding design enables simultaneous usage with wall storage.
- Able to hold 4 to 6 bicycles
- High-quality and durable
CONS:
- It takes several hours to install.
- For ease of use, height and upper body strength are required.
- Fat bikes cannot be accommodated
Delta El Greco Ceiling Hoist or Racor Bike Lift Pulley System
The only option for families without enough space for typical garage bike racks is ceiling bike storage! Even while we adore and favor the Saris Cycle Glide’s simplicity and adaptability, bike pulley systems are a more cost-effective alternative if you simply need to store a few bikes.
Additionally, bear in mind that you shouldn’t store your bike upside down if it has hydraulic disc brakes. Because of this, the Racor and Delta bike pulley system is especially well suited for expensive bikes.
Any size bike (12″ to 29″) can fit on a bike pulley, but it must be placed in accordance with the wheelbase length of the bike. When your youngster progresses to larger bikes, you will need to modify the system if it was installed to fit a 12′′ bike.
Garage Bike Racks for the Floor
Bike parking racks make full use of the available floor space, unlike the majority of residential bike storage solutions! For the bikes that see the most use and require the simplest access, floor bike racks are frequently employed.
They frequently form a component of a bigger garage bike storage system that only has a place for a few bikes on the ground since other bikes are stowed up and away to save space.
PROS:
- The best access for frequently used bicycles
- Easy to use for children
- Can be used to keep balance bikes in playrooms or the garage.
CONS:
- Many don’t fit children’s bikes under 20 inches
- some require valuable floor space and are not disc brake suitable.
Garage Bike Rack Favorites
Simple Housewares 5 Bike Floor Parking Rack
Floor bike racks have endured for a reason, so call them “old school.” They are really basic! And for a very low cost, you can store a family’s worth of bikes with the Simple Housewares floor bike rack.
Another bike rack that has found a permanent home in our garage is this one. Young children don’t require their parents to take their bikes off the wall or ceiling hooks.
There won’t be any more bikes piled up on the garage floor. Your children can be taught to put their own bikes away after they have ridden them out of the garage on their own. They have no reason not to because it is so simple!
PROS:
- Our 2-year-old utilizes it without having to raise the bike, and it works beautifully with various sizes of bikes.
- Limited footprint
- Inexpensive solution
CONS:
- Not built of sturdy material; quickly bends
- Will only handle five large bikes; the combination of small and large bikes works best.
- Not anchored to the floor
RAD Cycle Six Bike Garage Bike Stand
Two factors make the RAD Cycle six-bike floor stand special. First, you can keep bikes facing each other, three per side, in two distinct directions. If your garage is too small for that, you can use it as a 3-bike stand with bikes facing only one direction.
The presence of hooks for storing helmets is the second special characteristic. Ever find a floor covered in helmets? Or, you’re unable to locate your child’s helmet because it lacks a designated “spot”? This is a straightforward answer to that issue.
While storing 12″ and 16″ bikes on this floor bike stand isn’t ideal, it is possible. For little bikes, we added a 24 block to the rack’s floor to help the tire fit snugly into place.
Delta Cycle Shop Rack
It was designed to withstand abuse on your garage floor. The Shop bike stand from Delta is incredibly strong and long-lasting, and it has rubber feet to help it stay put while you load and unload your bike.
The adjustable width of the rack arms makes The Shop unique. For little children’s bikes, make that spacing narrower; for mountain bikes with large tires, make it wider.
PROS:
- Any tire width (from road to fat!) can be accommodated by adjustable wheel support arms.
- Can fit both children’s and adult bikes 16″+
- Simple entrances and exits, especially for children
- Robust and stable
CONS:
- Occupies priceless floor space
- To ensure that the arms are firmly in position, the screws must be cranked down.
- Unable to use with 12″ or 14″ tires, while it is possible with 16″
BIKE HAND Rack Stand
The BIKE HAND floor stand is quick and simple to use, securely holding bikes upright without any frame contact by cradling the back tire via three contact points.
The distinctive swiveling wheel cage of the BIKE HAND adds an extra point of contact that significantly boosts the stability of the bike while it is mounted on the rack as compared to other bike stands of the same design that we have examined.
There are two models of the rack. While the fat bike version can handle tires up to 5 inches wide, the ordinary model can only accommodate bikes with wheels 24 inches or larger and tires up to 2.4 inches wide.
Both types are incompatible with kids’ bikes that are 16 inches and under (the rotating arm hits the rear triangle of the bike). Single-speed 20″ bikes don’t seem to be an issue, but 20″ gear bikes are difficult since the spinning arm obstructs the chain.
Racor PBS-2R Floor Stand
A solid and durable solution for storing two bikes on the garage floor is Racor’s 2-bike floor bike rack. Two motorcycles can be stored in Racor either facing one another or in the same direction. You might want to place some rubber grip on the bottom of the rack because one issue we’ve had in our own garage is that the rack can easily slide when you try to load your bikes in.
On-wall horizontal bike storage involves mounting a bike flat against a wall, which takes up a lot of wall space but very little room space overall. It’s uncommon for more than two bikes to be stored in this manner in the same room because it takes up so much wall space.
There are two distinct types of horizontal bike storage: (1) a free-standing horizontal wall stand that rests against the wall, and (2) a wall-mounting version that is attached to the wall itself. Indoor bike storage that is horizontally oriented is highly popular.
PROS:
- Can fit in most rooms of your home, which is ideal for people who live in apartments.
- Vertical storage is generally easy to lift up and down.
- Available as free-standing or wall-mounting alternatives.
- A great way to “show” motorcycles
- Even balancing bikes can fit in certain alternatives for the tiniest bikes.
CONS:
- Occupies a lot of wall space
- Typically, this method can’t accommodate too many bikes.
- Most only accommodate larger kids’ bikes (24″ and perhaps 20″)
- It can be challenging for children to raise and lower bikes independently. Bikes with wider handlebars present more of a challenge.
Horizontal Bike Storage Favorites
Feedback Sports Velo 2D Wall Rack
The Feedback Velo 2D wall-mounted bike rack requires less wall space and can be customized to fit your bike frame thanks to its two-dimensional moveable arms.
The compact column base allows for independent movement of each arm, allowing the 2D to be adjusted to practically any bike frame design. This feature is not required for bicycles with flat top tubes. However, it’s a significant victory for children’s bikes or bicycles with sloping top tubes. Every bike we tried, from balancing bikes to road bikes, fit on the Velo 2D.
Because the bike rests so near to the wall, bikes with larger handlebars are more difficult to fit.
PROS:
- Amazingly adaptable – can store bicycles with practically any top tube design.
- Modern, sleek, and minimalist style
- Available in silver or black
- Durable, high-quality, and simple to install
- Can store adult bikes, children’s bikes, and balance bikes.
CONS:
- If you’re not careful, the sharp edges of the arms can scratch the frames.
Delta Cycle Michelangelo Free Standing Bike Rack
The freestanding bike rack from Delta has a number of benefits. (1) The walls won’t be harmed while storing two bikes horizontally. (2) It can be moved at any time with ease.
(3) The frame cradles can be tilted inward or outward and raised or lowered to fit almost any frame design. Everything from balancing bikes to children’s bikes and adult bikes might be stored.
Although this standing bike rack is suitable for use indoors or in the garage, we like it for indoor bike storage, so it could easily be added to the list below.
Indoor Bike Racks – Freestanding
We recommend a bike storage column or telescopic rack if you need to store two or more bikes but don’t want to attach any hardware to the wall. Bike storage columns, which are pressure-set between the floor and the ceiling, occupy the same amount of space as horizontal wall storage but can only be installed in rooms where the ceiling is low enough to support the column.
PROS:
- Nice for renters because it doesn’t require mounting any hardware to the wall
- Both inside and outside of the garage
- Moveable from one location to another
CONS:
- Restricted to spaces within the height range of the column
- Typically, this method can’t accommodate too many bikes.
- Typically only accommodates larger kids’ bikes (24″ and perhaps 20″)
- Kids may find it challenging to raise and lower bikes on their own.
Indoor Bike Rack Favorites
Topeak Dual-Touch Bike Stand
The Dual-Touch Bike Stand from Topeak has a modern, minimalist design that puts the spotlight on your bikes rather than a bulky rack. The idea is intriguing and straightforward: a pole made of black anodized metal is pressure-installed between the floor and the ceiling (dual contact points). No mounting hardware or wall damage is necessary!
The rack arms of the Dual Touch may be easily adjusted to fit bikes with flat or sloping top tubes and a range of sizes from child to adult cycles.
PROS:
- Modern, sleek, and minimalist in style
- Fits wheels of any size, from balance bikes to adults!
- Very adaptable for sloping or flat top tubes
- Comes almost entirely put together!
- No harm to walls
- Superior quality
CONS:
- Stable, however, it’s best not to have children constantly stumbling into it
FAQs
Is it OK to hang a bike by the wheel?
Yes, it is OK to hang a bike by the wheel.
What is the best way to hang a bike?
Steadyrack is the best way to hang a bike, in our opinion. This method works for children, they won’t have to rely on us.
Conclusion
There are a few different ways that you can hang bikes in your garage. You can either hang them from the ceiling or from a wall mount. If you have the space, you can also keep them on a bike rack. Whichever way you choose, make sure that the bikes are secured so they don’t fall and hurt someone.
Hope that our article can help you know how to hang a bike with hooks. And you can easily choose the best way to store your bike. Thanks for reading! Read more related posts about How Many Miles Should I Bike A Day?
