How To Put Your Dirt Bike On A Stand? Things To Know In 2023

How To Put Your Dirt Bike On A Stand Things To Know In 2023

Dirt bikes are a thrilling way to explore off-road terrains but require regular maintenance to keep them in top condition. One essential task is to elevate the bike on a stand to perform various maintenance procedures like cleaning, lubricating, or replacing parts. 

However, for novice riders, putting a dirt bike on a stand can seem daunting, especially if you’re not sure where to begin. 

Fear not, as in this article, BSXInsight will guide you through the step-by-step on how to put your dirt bike on a stand safely and efficiently. 

What’s a Bike Stand?

A bike stand is a device designed to hold a bicycle in place while you work on it, clean it, or perform routine maintenance.

It provides a stable and secure platform for the bike, making accessing different parts of the bike’s frame, wheels, or drivetrain easier.

Bike stands come in various designs, shapes, and sizes, depending on your bike type and the maintenance task you want to perform. Some bike stands are simple, consisting of two legs on either side of the rear wheel to hold it up.

Others are more complex, with adjustable clamps, hooks, or mounts that hold the bike securely in place by the frame, seat post, or fork. Some stands are also portable, while others are fixed and mounted to a bench or wall.

Using a bike stand has many advantages over working on your bike without one. It allows you to keep your bike stable and upright, which can prevent damage to delicate components like the derailleur or brake calipers.

It also frees up your hands to work on the bike without needing someone else to hold it for you. Additionally, bike stands can be height-adjustable, so you can position the bike comfortably for you to work on.

How To Put Your Dirt Bike On A Stand?

How To Put Your Dirt Bike On A Stand

Using a Fixed Stand

Step 1: Choose a level surface – The first step is to choose a flat and stable surface to place the fixed stand on. This will ensure that the stand does not tip over while you are putting the bike on it.

Step 2: Position the stand – Position the fixed stand directly behind the bike’s rear wheel. Make sure the stand’s arms are close to the wheel, and the stand is at a comfortable height.

Step 3: Lift the bike – Grasp the rear fender of the bike and lift the rear wheel off the ground. Then carefully guide the wheel into the fixed stand, ensuring that the stand’s arms fit securely against the sides of the wheel.

Step 4: Secure the bike – Once the bike is in the fixed stand, use tie-down straps or bungee cords to secure it to the stand. This will prevent the bike from falling off the stand while you work on it.

Using a Lift Stand

Side Panel Lift

A side panel lift is a type of lift stand that attaches to the bike’s side panels to lift it off the ground. To use this stand, follow these steps:

Step 1: Choose a level surface – As with any other stand, choose a flat and stable surface to place the side panel lift.

Step 2: Position the stand – Position the stand under the bike’s side panel, making sure that it is centered and stable.

See also  Peloton Bike Vs. Beachbody Bike: What Is Better 2023?

Step 3: Lift the bike – Lift the bike by the handlebars or the rear fender, and push down on the lever of the side panel lift to raise the bike off the ground.

Step 4: Secure the bike – Once the bike is lifted, secure it to the stand using tie-down straps or bungee cords.

Rear Tire Lift

A rear tire lift is another popular type of lift stand. It uses a lever mechanism to lift the bike’s rear wheel off the ground. Here are the steps to use it:

Step 1: Choose a level surface – As with any other stand, choose a flat and stable surface to place the rear tire lift.

Step 2: Position the stand – Position the stand under the rear wheel of the bike, making sure that the lift arm is touching the underside of the swing arm.

Step 3: Lift the bike – Grasp the rear fender of the bike and lift the rear wheel off the ground. Then, while holding the bike steady, push down on the lever of the rear tire lift to raise the bike off the ground.

Step 4: Secure the bike – Once the bike is lifted, secure it to the stand using tie-down straps or bungee cords.

Triangle Stand

A triangle stand is a simple and effective lift stand that lifts the bike off the ground by its frame. Here are the steps to use it:

Step 1: Choose a level surface – As with any other stand, choose a flat and stable surface to place the triangle stand.

Step 2: Position the stand – Position the stand under the bike’s frame, near the rear wheel.

Step 3: Lift the bike – Grasp the rear fender of the bike and lift the rear wheel off the ground. Then, while holding the bike steady, push down on the triangle stand’s lever to lift the bike off the ground.

Step 4: Secure the bike – Once the bike is lifted, secure it to the stand using tie-down straps or bungee cords.

Using Trick

Use trick Nose Wheelie

Nose Wheelie

Step 1: Get into position – Begin by approaching a flat, open area at a moderate speed. Stand on the footpegs and shift your weight forward to bring the front wheel off the ground.

Step 2: Balance on the front wheel – Once the front wheel is off the ground, use your body weight to balance on the front wheel. Keep your arms and legs slightly bent to absorb any bumps or movements.

Step 3: Control the throttle – Use the throttle to control the speed and balance of the bike. If the front wheel starts to drop, give the bike more gas to lift it back up.

Step 4: End the trick – To end the nose wheelie, release the throttle and let the front wheel come back down to the ground.

Rear Wheelie

Step 1: Get into position – Begin by approaching a flat, open area at a moderate speed. Stand on the footpegs and shift your weight back to bring the rear wheel off the ground.

Step 2: Balance on the rear wheel – Once the rear wheel is off the ground, use your body weight to balance on the rear wheel. Keep your arms and legs slightly bent to absorb any bumps or movements.

See also  How To Set Up Spin Bike? Must-Know Tricks For Your Bike 2023

Step 3: Control the throttle – Use the throttle to control the speed and balance of the bike. If the rear wheel starts to drop, give the bike more gas to lift it back up.

Step 4: End the trick – To end the rear wheelie, release the throttle and let the rear wheel come back down to the ground.

Types Of Dirt Bike Stand

Types Of Dirt Bike Stand

Two-Arm Stand

A two-arm stand is a simple and effective stand that uses two arms to support the bike. It is lightweight, portable, and easy to use.

To use this stand, position the arms under the bike’s frame or swingarm and lift the bike off the ground. Two-arm stands are ideal for quick maintenance tasks or for storage.

Fork Stands

Fork stands are a popular choice among dirt bike riders. They are designed to lift the bike off the ground by its front forks, allowing easy access to the front wheel and suspension components.

Fork stands come in different shapes and sizes, and some models come with adjustable heights to accommodate different types of bikes.

Swingarm Stands

Swingarm stands are designed to lift the bike off the ground by its swingarm. They are similar to fork stands but lift the bike from the rear instead of the front.

Swingarm stands are ideal for rear wheel maintenance, such as changing the tire or adjusting the chain.

Pitbull Stands

Pitbull stands are a popular choice among professional racers and mechanics. They use a hydraulic system to lift the bike off the ground and provide a stable and secure platform for maintenance tasks.

Pitbull stands are versatile and can lift the bike from different points, such as the forks, swingarm, or rear axle.

Axle Stands

Axle stands are designed to lift the bike off the ground by its axle. They are ideal for rear wheel maintenance and provide a stable and secure platform for tasks such as changing the tire or adjusting the chain.

Axle stands come in different shapes and sizes and can be adjusted to fit different types of bikes.

How to Build a Dirt Bike Stand?

How to Build a Dirt Bike Stand

Building your own dirt bike stand can be a great way to save money and customize your stand to fit your specific needs.

Here is a step-by-step guide on how to build a simple and sturdy dirt bike stand using basic tools and materials.

Materials:

  • Two 8-foot 2×6 boards
  • Two 12-inch pieces of 2×6 board
  • One 18-inch piece of 2×6 board
  • Four 2 1/2-inch wood screws
  • Four 3-inch wood screws
  • Wood glue
  • Saw
  • Drill
  • Tape measure

Instructions:

  1. Cut the two 8-foot 2×6 boards into four equal pieces, each 24 inches long. These will be the legs of the stand.
  2. Cut the two 12-inch pieces of 2×6 board in half to make four 6-inch pieces. These will be the crossbars that connect the legs.
  3. Cut the 18-inch piece of 2×6 board in half to make two 9-inch pieces. These will be the braces that support the bike.
  4. Take two of the 24-inch pieces and lay them parallel to each other, about 12 inches apart.
  5. Place one of the 6-inch crossbars between the two legs, flush with the top of the legs. Secure the crossbar to the legs with two 2 1/2-inch wood screws and wood glue.
  6. Repeat step 5 with the other two legs and the remaining two crossbars.
  7. Lay the two sets of legs flat on the ground, with the crossbars facing up.
  8. Place the two 9-inch braces between the legs, one on each side of the stand. Secure the braces to the legs with two 3-inch wood screws and wood glue.
  9. Turn the stand over and check that it is level and stable.
  10. Your dirt bike stand is now complete and ready to use.
See also  Do Electric Bikes Need To Be Registered? Must Know Tricks For Your First Bike 2022

Tips:

  • You can customize the dimensions of the stand to fit your specific needs. For example, if you have a larger bike, you may want to make the legs longer or wider.
  • Use wood glue in addition to screws to ensure a strong and sturdy connection between the pieces.
  • Sand the edges of the wood to prevent splinters and rough spots.

FAQs

FAQs how to put your dirt bike on a stand

Why do I need a stand for my dirt bike?

A stand makes it easier to perform maintenance tasks such as changing the oil, cleaning the chain, or replacing the tires. It also helps to prevent damage to the bike by keeping it stable and off the ground.

How do I choose the right stand for my dirt bike?

Consider the size and weight of your bike, the type of maintenance tasks you will be performing, and your budget. Look for stands that are sturdy, easy to use, and provide a stable and secure platform for your bike.

How do I lift my dirt bike onto the stand?

There are several methods for lifting your dirt bike onto the stand, including using a fixed stand, a lift stand, or a trick such as a nose wheelie or rear wheelie. Follow the manufacturer’s instructions for using the stand, and be sure to lift the bike evenly and securely.

Can I use a car jack to lift my dirt bike onto a stand?

No, it is not recommended to use a car jack to lift your dirt bike onto a stand. Car jacks are not designed for this purpose and can be unstable and dangerous. Use a stand that is specifically designed for dirt bikes.

How do I maintain my dirt bike stand?

Regularly check the stand for any damage or wear, and replace any worn or damaged parts. Keep the stand clean and dry, and store it in a dry and secure location when not in use. Follow the manufacturer’s instructions for any maintenance or cleaning tasks.

Conclusion

Putting your dirt bike on a stand may seem like a daunting task, especially for those new to the world of motocross. However, with the right equipment and a bit of practice, it can be a straightforward process.

By following the steps outlined in this article, you can safely and effectively put your dirt bike on a stand and perform the necessary maintenance and repairs.

Remember to invest in a high-quality stand that is appropriate for your bike, and always take care when lifting and lowering your bike. With the right technique and attention to detail, you can become a pro at putting your dirt bike on a stand in no time.

Leave a Reply

Your email address will not be published. Required fields are marked *